Red-Ring WA 120 small axial fan with automatic shutter
The Red-Ring WA 120 small axial fan with automatic shutter extracts air directly through the wall: 170 cubic metres per hour, up to a resistance of 40 pascals, according to the manufacturer for a bathroom or WC of approx. 16 cubic metres. Its electrical shutter opens with a delay when the fan is switched on and closes when it is switched off; the fan is started with the light switch or a separate switch, and a red indicator lamp shows when it is operating.
Its power consumption is 15 W, its sound pressure at 3 m is 42 dB(A), its IP rating is IPX4, its protection class is II, and its motor has thermal protection. Its front cover measures 180 × 180 mm and its spigot is Ø119 mm; it can be installed in a wall, in a ceiling or, with a window kit, in a window. Our expert staff will help you with your choice.

Small axial fan with shutter for bathrooms and WCs
The Red-Ring WA 120 small axial fan with automatic shutter extracts air directly through the wall to the outside. Its air volume is 170 cubic metres per hour, which according to the manufacturer is enough for a bathroom or WC of approx. 16 cubic metres. It is made by the Austrian company Red-Ring.
Its front cover has an electrical shutter: when the fan is switched on, it opens with a delay of a few seconds, and it closes after switch-off. The fan can be started with the light switch or a separate switch, and a red indicator lamp shows when it is operating. The motor has built-in thermal protection.
Technical data
According to Red-Ring's data sheet and product page
| Manufacturer's part number | 02605 |
|---|---|
| Air volume | 170 m³/h (47 l/s) |
| Maximum pressure | 40 Pa |
| Power consumption | 15 W |
| Sound pressure at 3 m | 42 dB(A) |
| Voltage | 230 V, 50 Hz; built-in thermal protection in the motor |
| IP rating / protection class | IPX4 / class II |
| Ambient temperature | max. 40 °C |
| Shutter | electrical, opens and closes with a delay |
| Front cover | 180 × 180 mm |
| Depth / front cover | 121 mm / 51 mm |
| Spigot | Ø119 mm |
| Weight | 0.8 kg |
| Installation | wall, ceiling, window (with window kit) |
How does it work?

Self-opening and self-closing shutter
The WA is powered via the light switch or a separate switch. A few seconds after switch-on, the slats of the shutter open and the fan starts; at switch-off, the slats close with a delay. The red indicator lamp shows that the fan is running.
- 170 cubic metres per hour, up to 40 pascals. It is an axial fan, so it is designed for low resistance: according to the manufacturer, directly through the wall, up to a pipe length of approx. 2.5 metres. Longer ducts require a centrifugal fan.
- 15 watts, 42 dB(A) at 3 metres.
- Protection class II, IPX4. No earthing is required.
- Without filter. For this reason, the manufacturer does not recommend it for kitchen extraction.
Performance curve
From the Red-Ring manufacturer's data sheet

On the manufacturer's chart, the WA 120 is the middle curve (marked 120): free-blowing, it delivers approx. 170 cubic metres per hour, and at a resistance of 40 pascals it no longer delivers any air. This is why the manufacturer recommends it for a pipe length of up to approx. 2.5 metres.
Dimensions and mounting locations
According to the Red-Ring manufacturer's data sheet


Wall, ceiling or window
The front cover of the WA 120 measures 180 × 180 millimetres and its total depth is 121 millimetres, of which the front cover accounts for 51 millimetres; the spigot is Ø119 millimetres, and the fan weighs 0.8 kilograms.
It can be installed in walls and ceilings, and in windows with the manufacturer's IGG 120 (with grille) or IGK 120 (with shutter) facade kit, with a glass thickness of up to 22 millimetres. Please ask our staff about the window kit.
Manufacturer's data sheet and operating instructions
Red-Ring's German-language data sheet contains the data, dimensions and performance curve of the WA series; the operating instructions contain the rules and drawings for installation and connection.
What to watch out for during installation
- Installation should be carried out by a qualified specialist. The fan must be connected to the mains via a two-pole switch with a contact opening of at least 3 millimetres or via a plug.
- According to the manufacturer, it must be mounted at a height of at least 2.30 metres for proper performance.
- It should discharge directly to the outside or through its own short duct; it must not be connected to a smoke flue chimney or to the duct carrying the flue gases of a fireplace or boiler.
- The room needs sufficient make-up air; this is particularly important where there is a fuel-burning appliance connected to a chimney (water heater, gas convector heater).
- It can be used at ambient temperatures of up to 40 °C and must not be exposed to rain, sunshine or snow. It must not be operated near flammable vapours.
- The power cable can be fed in from the rear or from the top.
- Cleaning: disconnect from the power supply, then wipe the front cover and the outer shutter with a soft cloth.

Buy from one of Hungary's most trusted ventilation specialists
Ventilátorház is located at Királyhágó utca 30 in Budapest's XVIII. district. We are a multi-award-winning company with decades of experience. Our expert staff will help you with sizing and choosing accessories — call them on +36-70-369-9944.
Frequently asked questions
The manufacturer recommends the WA 120 for a bathroom or WC of approx. 16 cubic metres; its air volume is 170 cubic metres per hour.
The WA 120 has an electrical shutter on its front cover, which closes when the fan is not running. A Red-Ring W 120 is the same model without shutter.
Only over a short section: it is an axial fan with a maximum pressure of 40 pascals, so the manufacturer recommends it for a pipe length of up to approx. 2.5 metres. Longer ducts require a centrifugal fan.
The manufacturer does not recommend it, because it has no grease filter.
Yes, with the manufacturer's IGG 120 or IGK 120 facade kit, with a glass thickness of up to 22 millimetres.
The manufacturer offers them: the WA 120 T with a run-on time adjustable within 3–25 minutes, and the WA 120 TH additionally with a humidity sensor adjustable within 40–90 per cent. Our online shop sells the basic WA 120; please ask our staff about the others.



