Cairox OP ISDB 200 insulated 45° bend
The Cairox OP ISDB 200 insulated 45° bend is a fitting of the OctoPLUS home ventilation system. Its inner diameter is 200 mm, its outer diameter 234 mm, and it is made of expanded polystyrene (EPS) with added graphite.
Its inner wall is smooth, its airtightness class is ATC1 (EN 17192) and its thermal conductivity is λ = 0.029 W/mK. A 90° fitting can be assembled from two such bends. Our expert staff will help you with sizing and choosing accessories.

Cairox OP ISDB 200 insulated 45° bend
The Cairox OP ISDB 200 insulated 45° bend is made for the insulated ductwork of the OctoPLUS system. It is made of expanded polystyrene (EPS) and has an inner diameter of 200 mm and an outer diameter of 234 mm.
You will find the insulated rigid duct and the fittings of the OctoPLUS system in all three sizes in the Insulated rigid ducts and fittings category.
Which size do you need?
The OP ISDB insulated 45° bend is made in the sizes NA125, NA160 and NA200, and in our online shop the variants differ in their inner and outer diameters. The variant you are viewing is highlighted in the table.
| Type | Inner diameter | Outer diameter |
|---|---|---|
| OP ISDB 125 | 125 mm | 159 mm |
| OP ISDB 160 | 160 mm | 194 mm |
| You are viewing this: OP ISDB 200 | 200 mm | 234 mm |
Why do we recommend it?
Thanks to its smooth inner wall, you can expect a low pressure loss. The material, which contains added graphite, is resistant to fungi, mould and bacteria.
Use
We recommend the insulated ventilation bend where larger volumes of air have to be carried between the home ventilation unit and the supply and extract elements, and between the air handling unit and the distribution boxes. The bend is fully compatible with the OctoPLUS system and with standard ventilation fittings. Two 45° bends can be connected to form a 90° fitting.
Technical data
| Feature | Value |
|---|---|
| Type | Cairox OP ISDB 200 |
| System | OctoPLUS |
| Angle | 45° |
| Inner diameter | 200 mm |
| Outer diameter | 234 mm |
| Material | expanded polystyrene (EPS) with added graphite |
| Thermal conductivity (λ) | 0.029 W/mK |
| Airtightness class | ATC1 (EN 17192) |
| Pack size | 1 piece |
Manufacturer's documents
The manufacturer's data sheet in Hungarian contains the technical data table for all three sizes.
Accessories for the system
We recommend these OctoPLUS components with it: 200 mm insulated duct, connector, tee and damper, as well as a mounting bracket and a reducer.

Buy from one of Hungary's most trusted ventilation specialists
Ventilátorház is located at Királyhágó utca 30 in Budapest's XVIII. district. We are a multi-award-winning company with decades of experience. Our expert staff will help you with sizing and choosing accessories. Call them on +36-70-369-9944.
Frequently asked questions
It is made of expanded polystyrene (EPS) with added graphite. You will also find the material in the technical data table above.
It is compatible with the components of the OctoPLUS system and with standard ventilation fittings. You can read about its use in the Use section above.
The inner diameter is 200 mm, the outer one 234 mm. You will find the other sizes in the size table above.



