Awenta PRO VCB160-8 distribution box
The Awenta PRO VCB160-8 distribution box is made for heat recovery ventilation systems. You can connect up to 8 ventilation ducts of 75 mm to it. Its connection to the air handling unit is Ø160 mm. It is made of modified polypropylene with the Nano-Silver bacteriostatic additive.
Unused connectors can be closed with the supplied end caps, and the gaskets are also supplied. The price is for one box. Our expert staff will help you with sizing and choosing accessories.

Awenta PRO VCB160-8 distribution box
The Awenta PRO VCB160-8 distribution box is part of the heat recovery system. It distributes the supplied air to the rooms or collects the used air from the rooms. The box is directly connected to the air handling unit.
You will find the other Awenta PRO distribution boxes and the plenum boxes in the PVC heat recovery distribution boxes and valve plenums category.
Which variant do you need?
This is how the Awenta PRO VCB distribution boxes in our online shop differ from each other. The variant you are viewing is highlighted in the table.
| Type | Design | Connection (mm) | Connectors (Ø75 mm) |
|---|---|---|---|
| You are viewing this: Awenta PRO VCB160-8 | distribution box | Ø160 | 8 |
| Awenta PRO VCB200-8 | distribution box | Ø200 | 8 |
| Awenta PRO VCB160-12 | distribution box | Ø160 | 12 |
| Awenta PRO VCB200-12 | distribution box | Ø200 | 12 |
| Awenta PRO VCB200-16 | distribution box | Ø200 | 16 |
| Awenta PRO VCB125-6 | distribution box with side connector | Ø125 | 6 |
| Awenta PRO VCB160-6 | distribution box with side connector | Ø160 | 6 |
| Awenta PRO VCB160-10 | distribution box with side connector | Ø160 | 10 |
| Awenta PRO VCB160-14 | distribution box with side connector | Ø160 | 14 |
| Awenta PRO VCB160/200-8 | straight-through distribution box | Ø160 / Ø200 | 8 |
| Awenta PRO VCB160/200-12 | straight-through distribution box | Ø160 / Ø200 | 12 |
Why do we recommend it?

Sealed connectors
- Gaskets: All VCB boxes are supplied with mounting gaskets for a tight connection between the connector and the ventilation duct.
- Tightness: The box belongs to tightness class ATC1.
Technical data
| Feature | Value |
|---|---|
| Type | VCB160-8 |
| System | Awenta PRO, heat recovery system |
| Design | distribution box |
| Connection to the air handling unit | Ø160 mm |
| Connectors | 8 pieces, for 75 mm ducts |
| Material | modified polypropylene (PP) with the Nano-Silver bacteriostatic additive |
| Packaging unit | 1 piece |
Its manufacturer is Awenta from Poland. The company is based in Stojadła.
Dimensions
The manufacturer's dimensional drawing: all dimensions in millimetres.

On the dimensional drawing above, Ø1 marks the connection to the air handling unit and Ø2 the 75 mm connectors.
| Type | Ø1 | Ø2 | A | B | W | Z |
|---|---|---|---|---|---|---|
| VCB160-8 | 160 | 75 | 347 | 349 | 104 | 38 |
Performance curves
This is how the pressure drop changes with the air flow rate.

There is a separate curve for supply and for exhaust.
Installation
An integral part of each box is its mounting system with adjustable mounting brackets.

The patented fixing system enables precise adjustment of the distance between the box and the mounting planes and makes it easy to remove the box if necessary. Independently adjustable brackets allow the horizontal installation of the box, enabling it to be tilted as well.
VCB series boxes are designed for installation in a heated area of the building. Otherwise, they must be insulated with a layer of mineral wool of at least 15 cm. The box can be permanently embedded into the screed or ceiling, or installed under plasterboards.
You can close unused connectors with the end caps with gaskets supplied with the box. The figures of the installation manual above show the fixing steps on the box with 8 connectors, and you can download the illustrated manual below.
Ducts from the Awenta PRO system
You can connect the box to the system with these ducts.
- For the 75 mm connectors, the double-layer flexible duct of the Awenta PRO system is the VFG75.
- For the Ø160 mm connection we recommend the KO160 round PVC duct, which is designed for installing distribution boxes.
- This duct comes in lengths of 0.5, 1 and 1.5 metres.

The figures above show the steps of connecting the ducts on the box with 8 connectors. You will also find these items below, among the accessories.
Manufacturer's documents
You can download the illustrated installation manual and the English data sheet of the VCB160-8 here.
Accessories for this product
We recommend these ducts for the Awenta PRO VCB160-8 distribution box.

Buy from one of Hungary's most trusted ventilation specialists
Ventilátorház is located at Királyhágó utca 30 in Budapest's XVIII. district. We are a multi-award-winning company with decades of experience. Our expert staff will help you with sizing and choosing accessories. Call them on +36-70-369-9944.
Frequently asked questions
Its material contains the Nano-Silver bacteriostatic additive. You will also find the material in the technical table above.
The connection to the air handling unit, i.e. the main branch, is Ø160 mm, and the branches are 75 mm. You will find the other dimensions on the dimensional drawing and in the table above.
In our online shop there are VCB distribution boxes with 6, 8, 10, 12, 14 and 16 connectors. You will find all of them in the variant table above.
There is no such version in our online shop. You will find the 75 mm VCB distribution boxes in the variant table above.



