Cairox OP ISDR 125 insulated duct
The Cairox OP ISDR 125 insulated duct is 1 metre long and is made for the OctoPLUS home ventilation system. Its inner diameter is 125 mm, its outer diameter 159 mm, and it is made of expanded polystyrene (EPS) with added graphite.
It is made without a seam, its airtightness class is ATC1 (EN 17192) and its thermal conductivity is λ = 0.029 W/mK. The 17 mm thick wall can be cut with a knife, and markings every 5 cm help you cut it to size. Our expert staff will help you with sizing and choosing accessories.

Cairox OP ISDR 125 insulated duct
The Cairox OP ISDR 125 insulated duct is made for the OctoPLUS system in 1-metre sections. It is made of expanded polystyrene (EPS) and has an inner diameter of 125 mm and an outer diameter of 159 mm.
You will find the insulated rigid duct and the fittings of the OctoPLUS system in all three sizes in the Insulated rigid ducts and fittings category.
Which size do you need?
The OP ISDR insulated duct is made in the sizes NA125, NA160 and NA200, and in our online shop the variants differ in their inner and outer diameters. The variant you are viewing is highlighted in the table.
| Type | Inner diameter | Outer diameter |
|---|---|---|
| You are viewing this: OP ISDR 125 | 125 mm | 159 mm |
| OP ISDR 160 | 160 mm | 194 mm |
| OP ISDR 200 | 200 mm | 234 mm |
Why do we recommend it?
It is made without a seam, which gives better airtightness and a lower risk of damage. Its inner wall is smooth, so the pressure loss is low. Its material is resistant to fungi, mould and bacteria.
Use and installation
The insulated duct can carry larger volumes of air between the home ventilation unit and the supply and extract elements, and between the air handling unit and the distribution boxes. The duct is fully compatible with the OctoPLUS system and with standard ventilation fittings. It can also be used with fittings of the same size from the PVC and spiral-seamed duct systems in our online shop, but it cannot be fixed with the OBMC rubber-lined clamp.
Markings every 5 cm make installation easier, as they help you cut the duct to the required length. The wall thickness of 17 mm allows you to cut the duct with a knife.
Technical data
| Feature | Value |
|---|---|
| Type | Cairox OP ISDR 125 |
| System | OctoPLUS |
| Inner diameter | 125 mm |
| Outer diameter | 159 mm |
| Length | 1000 mm |
| Wall thickness | 17 mm |
| Material | expanded polystyrene (EPS) with added graphite |
| Thermal conductivity (λ) | 0.029 W/mK |
| Airtightness class | ATC1 (EN 17192) |
| Internal dimensions | according to EN 1506:2007 |
| Pack size | 1 piece |
Manufacturer's documents
The manufacturer's data sheet in Hungarian contains the technical data table for all three sizes.
Accessories for the system
We recommend these OctoPLUS components with it: 125 mm connector, 45° bend, tee and damper, as well as a mounting bracket and a reducer. For a 90° change of direction, the 125 mm bend with rubber sealing from the spiral-seamed duct system can also be used.

Buy from one of Hungary's most trusted ventilation specialists
Ventilátorház is located at Királyhágó utca 30 in Budapest's XVIII. district. We are a multi-award-winning company with decades of experience. Our expert staff will help you with sizing and choosing accessories. Call them on +36-70-369-9944.
Frequently asked questions
It is made of expanded polystyrene (EPS) with added graphite. You will also find the material in the technical data table above.
Yes. You can read more about the markings and cutting in the Use and installation section above.
The inner diameter is 125 mm, the outer one 159 mm. You will find the other sizes in the size table above.
Yes, it also works with the 125 mm PVC and spiral-seamed fittings in our online shop. The OBMC rubber-lined clamp cannot be used to fix it.



