Nemes Ventilátorház

Kérdése van? +36-70-369-9944

Categories
Nemes Ventilátorház

Kérdése van? +36-70-369-9944

  • Categories
    • Bathroom and toilet extractor fans
    • Window Fans
    • Cooker hoods
    • Industrial ventilation accessories
    • Industrial ventilation
    • Commercial kitchen extract fans
    • In-line duct fans
    • Centrifugal fans (low pressure)
    • Heat Recovery Systems
    • PVC heat recovery distribution boxes and valve plenums
    • Metal heat recovery distribution boxes and valve plenums
    • Heat recovery system installation materials
    • Metal fittings
    • Metal ducts (rigid and flexible)
    • Duct heaters
    • Silencers
    • Air inlets
    • Air valves
    • Instrument fans
    • Butterfly dampers
    • Rigid round PVC ducts and fittings
    • Rigid rectangular PVC ducts and fittings
    • Flexible PVC ducts
    • Grilles and louvres
    • Fixing and suspension clamps
    • Controllers and electronics
    • Installation accessories
    • Insulated rigid ducts and fittings
    • Insulation materials
    • Access doors
    • Filter boxes and filter media
    • Roof terminals and roof cowls
    • Fire protection products
    • Fan accessories
    • Backdraught shutters
    • Fan filters
Helios M1/150 MiniVent small room fan
Helios M1/150 MiniVent small room fan
350 €
  1. Bathroom and toilet extractor fans
  1. Bathroom and toilet extractor fans

Helios M1/150 MiniVent small room fan

Helios M1/150 MiniVent small room fan
Helios M1/150 MiniVent small room fan
Helios M1/150 MiniVent small room fan
Helios M1/150 MiniVent small room fan
Helios M1/150 MiniVent small room fan
Helios M1/150 MiniVent small room fan
Helios M1/150 MiniVent small room fan
Helios M1/150 MiniVent small room fan
350 €

The Helios M1/150 MiniVent is the largest axial small room fan of the MiniVent M1 range, with a highly efficient EC motor: at low level it moves 220 cubic metres of air per hour on 4.5 watts, and at high level 260 cubic metres per hour. At low level its noise level at a distance of 3 metres is 35 dB(A). Its connection spigot is Ø145 mm, so it connects to a 150 duct, and it is suitable for a room of approximately 20–30 square metres.

It is developed in Germany by Helios, its impeller runs on ball bearings, the backdraught shutter is fitted as standard in its spigot, and its completely closed facade conceals the dirty fan opening. With protection category IPX5 it can also be installed near the shower. Our expert staff will help you with sizing and choosing accessories.

Diameter Diameter:
100
125
150
Convenience Features Convenience Features:
Standard
Humidity-controlled
Run-on timer
Max. Airflow Max. Airflow:
260 m3/h
100 napos pénzvisszafizetési garancia
100 napos visszafizetési garancia
Tudjon meg többet!
Ingyenes légtechnikai tanácsadás
Országos kiszállítás
akár másnapra
Mindössze 2500 forintért
Data
Type of Airflow:
Axial
Availability:
Within 48 hours
Diameter:
150
Convenience Features:
Standard
Mounting Method:
Wall and ceiling
Noise Level:
Quiet
Max. Airflow:
260 m3/h
Manufacturer:
Helios
Bearing Type:
Ball bearing
Speed Levels:
Multi-speed
Louvre:
Backdraught shutter
Pipe Insertable:
No
Protection:
IPX5
Colour:
White
Material:
Plastic housing
Max. pressure:
33 Pa
Voltage:
230
Size:
210 x 210
EAN:
4010184060413
Number of phases:
1
Motor poles:
EC
Max. current consumption:
0.08 A
Weight:
1.20
Power consumption:
8 W
Rated speed (rpm):
1 900
Air temperature range (°C):
max. +40
Manufacturer's part number:
06041
Product family:
Helios MiniVent M1
Sound pressure at 3 m (dB(A)):
35
Website:
https://www.heliosventilatoren.de/de/produkte/klei...
Professzionális bemutatóterem
Professzionális bemutatóteremPróbálja ki termékeinket Budapesten, a Királyhágó utca 30. alatt
Ingyenes szaktanácsadás
Ingyenes szaktanácsadásTapasztalt és segítőkész szakembereink várják hívását
Megbízható kereskedő
Megbízható kereskedő32 év tapasztalatával az ország egyik legnagyobb forgalmazója
Díjnyertes vállalkozás
Díjnyertes vállalkozásDíjainkat és kiemelkedő értékeléseinket tisztességes üzletvitelünk miatt kaptuk
Details

Helios M1/150 MiniVent: the largest size, with EC motor

The Helios M1/150 MiniVent axial small room fan is the largest size of the MiniVent M1 range, and it is made with a highly efficient EC motor. At low level it moves 220 cubic metres of air per hour, and in this operating mode its noise level at a distance of 3 metres is 35 dB(A). At high level its volume flow is 260 cubic metres per hour; its connection spigot is Ø145 mm, so it connects to 150 ducts. This size is suitable for a room of approximately 20–30 square metres. If the air has to pass through a duct and an external shutter, the volume flow is lower: the manufacturer's figure is 180 cubic metres per hour at 31 pascals of resistance.

This is the standard model: it can be wired for two speeds and contains no electronics. To switch between the two speed levels you need an operating and speed switch 0-1-2, and for the connection a 3 × 1.5 mm² cable — you will also find the manufacturer's own MVB switch in our shop. If you would like it to keep running on its own for a while after the light is switched off, the same size is also available in a version with turn-off delay, the Helios M1/150 N/C, and in a version with humidity control function; please ask our staff about the 0-10 V type with continuously variable control.

The manufacturer recommends this size for small to medium-sized rooms, in private buildings just as in commercial or industrial buildings: for bathrooms, washrooms, changing rooms, utility rooms and kitchenettes. This unit is not suitable for ventilating large retail premises, workshops or warehouses — they need an industrial fan, and we will gladly help you with that too. The M1 series is developed in Germany by Helios; its front facade is completely closed, a multi-award-winning design, and the air flows in from all sides — so it conceals the dirty fan opening, and the smooth surface can be kept clean with a single wipe.

Data sheet

The official Helios catalogue page contains the technical data of all three sizes and all versions of the MiniVent M1, the performance curves, the dimensional drawings and the wiring diagram numbers. It is useful for electricians, architects and anyone looking for precise data for the installation. The manufacturer's part number (ref. no.) of this version is 06041.

Download the manufacturer's data sheet The manufacturer's page
Helios M1/150 MiniVent exploded view: facade, impeller, guide wheel, backdraught shutter
i

Did you know? If the room has a suspended ceiling and you want to route the ventilation duct above the ceiling, this is not the right choice — that calls for a centrifugal fan with a recessed casing, even if the duct run is short. The M1 is designed to ventilate through the wall, via a short duct, directly outdoors.

Technical data

The three Ø150 versions available in our shop; highlighted: the variant you are viewing.

M1/150M1/150 N/CM1/150 F
Ref. no.060410604206043
VersionStandard model with two speed levelsTurn-off delay and interval modeWith humidity control function
MotorHighly efficient EC motor
Flow rate free blowingm³/h260 / 220
Volume flow at 31 Pa resistancem³/h180
Maximum pressurePa33
Power consumptionW8 / 4.58 / 59 / 6
Rated currentA0.08 / 0.060.10 / 0.090.08 / 0.06
Sound pressure level at 3 mdB(A)39 / 35
Speed1/min1900 / 1600
Impeller diametermm137
Connection spigotmmØ145 (for 150 ducts)
Voltage / frequency / phaseV / Hz230 / 50 / 1
Turn-off delay time, adjustablemin–6, 10, 15, 216, 12, 18, 24
Interval mode, adjustableh–0, 8, 12, 24–
Start-up delays–0, 45, 90, 1200, 45, 90, 120
Humidity limit value (via potentiometer)%––40–90
Humidity control modes––one-stage, two-stage, variable
Backdraught shutterFitted as standard, removable
Electrical supply line NYM-Omm²3 × 1.54 × 1.54 × 1.5
Wiring diagram no.108010811082
Protection categoryIPX5, protection class II
Max. air flow temperature°C+40
Weightkg1.20

Dimensions

All dimensions in millimetres

Helios M1/150 MiniVent dimensional drawing

The facade measures 210 × 210 mm and projects 48 mm from the wall. The connection spigot is Ø145 mm. The unit is installed 142 mm deep into the wall; in case of restricted space conditions the guide wheel can be removed, which reduces the installation depth to 76 mm. The drilling distance of the fastening screws is 170 mm, and the required wall opening is 165 mm.

Performance curve

Click the image to enlarge

Helios M1/150 MiniVent performance curve

M1/150 — performance curve

The curve shows how much air the fan delivers as a function of the back pressure, calculated for an air density of 1.20 kg/m³. With free blowing at high level it delivers 260 cubic metres per hour, at 31 pascals of resistance 180 cubic metres per hour, and its maximum pressure is 33 pascals. The diagram also shows, as dashed lines, the levels of the 0-10 V controllable type; please ask our staff about that version.

Why do we recommend it?

EC motor: 220 cubic metres per hour from 4.5 watts

Size 150 is made with a highly efficient EC motor, and this shows in its consumption: at low level it moves 220 cubic metres of air per hour with a power consumption of 4.5 watts — if it runs for 3 hours a day, this is approximately 4.9 kilowatt hours a year. At high level, 8 watts and 260 cubic metres per hour. For comparison: size 120 delivers less air (150 cubic metres per hour) and consumes more (10 watts).

The backdraught shutter is fitted as standard

The connection spigot contains the tight-closing backdraught shutter, which is not standard equipment in every small room fan. When the fan stops, the shutter closes, so no cold air is drawn into the room through the duct. The shutter can be removed if the installation requires it.

Ball-bearing motor, in any mounting position

The ball bearings are designed for 40 000 operating hours, so the unit works in any position, even directly in the ceiling. The motor has thermal overload protection, and the manufacturer describes it as maintenance-free — however, regular cleaning of the impeller is necessary for this fan too; without it, any fan wears out sooner.

Also for wet room zone 1

It is made with jet water protection IPX5 and protection class II, so it can be installed in zone 1 according to DIN VDE 0100-701, i.e. also near the shower and the bathtub. The electrical connection is made easier by screwless terminals and the circumferential cable storage space of the casing.

Accessories for this product

For Ø150 installation, from our online shop

Frequently Asked Questions

At high level, with free blowing, it moves 260 cubic metres of air per hour, which is sufficient for a room of approximately 20–30 square metres. In practice, the resistance of the duct run and the external shutter reduces this figure: the manufacturer's figure is 180 cubic metres per hour at 31 pascals of resistance. We will gladly help you with sizing.

Yes. The standard model has two speeds, and to switch between them you need an operating and speed switch 0-1-2; for its connection the manufacturer specifies a 3 × 1.5 mm² cable, and the wiring diagram number is 1080. Helios's own MVB switch is suitable for this, and you will also find it in our shop. If you only use one speed level, a conventional light switch is sufficient.

Because size 150 is made with a highly efficient EC motor, while the 100 and the 120 have an AC motor. The figures: at low level the 150 delivers 220 cubic metres per hour from 4.5 watts, the 120 delivers 150 cubic metres per hour from 10 watts, and the 100 delivers 75 cubic metres per hour from 5 watts. So the largest size not only delivers the most air, but also consumes the least per cubic metre.

The ball-bearing motor is designed for 40 000 operating hours, so the unit works in any mounting position — even directly in the ceiling. However, if there is a suspended ceiling and you want to route the ventilation duct above the ceiling, this is not the right choice: that calls for a centrifugal fan with a recessed casing, even if the duct run is short.

No. An axial fan cannot cope with the pressure in the common stack: either it pushes the air back into the room, or it cannot extract it. A common exhaust stack needs a centrifugal fan designed for duct systems. This unit is designed to ventilate through the wall, via a short duct, directly outdoors.

Yes. The unit is made with jet water protection IPX5 and protection class II, so it can also be used in zone 1 according to DIN VDE 0100-701 — i.e. also in the part of the wet room close to the shower. The electrical connection should be carried out by a qualified electrician.

We also recommend the following product as an accessory

Tartozékok ehhez a termékhez

A Nemes Ventilátorház csapata

Vásároljon Magyarország egyik legmegbízhatóbb légtechnikai áruházából

A Ventilátorház Budapest XVIII. kerületében, a Királyhágó utca 30. alatt található. Sokszoros díjnyertes cég vagyunk, több évtizedes tapasztalattal. A méretezésben és a tartozékok kiválasztásában szakértő munkatársaink segítenek — hívja őket a +36-70-369-9944 telefonszámon.

Ingyenes tanácsadást kérek Felhívom most
Customer account
  • Sign In
  • Sign Up
  • My Profile
  • Cart
  • My Favorites
Information
  • Terms and Conditions
  • Privacy Policy
  • Payment
  • Shipping
  • Contact details
  • Blog
  • facebook

WebShop System
simplepay_hu_v2
viva_com
  • Bathroom and toilet extractor fans
  • Window Fans
  • Cooker hoods
  • Industrial ventilation accessories
  • Industrial ventilation
  • Commercial kitchen extract fans
  • In-line duct fans
  • Centrifugal fans (low pressure)
  • Heat Recovery Systems
  • PVC heat recovery distribution boxes and valve plenums
  • Metal heat recovery distribution boxes and valve plenums
  • Heat recovery system installation materials
  • Metal fittings
  • Metal ducts (rigid and flexible)
  • Duct heaters
  • Silencers
  • Air inlets
  • Air valves
  • Instrument fans
  • Butterfly dampers
  • Rigid round PVC ducts and fittings
  • Rigid rectangular PVC ducts and fittings
  • Flexible PVC ducts
  • Grilles and louvres
  • Fixing and suspension clamps
  • Controllers and electronics
  • Installation accessories
  • Insulated rigid ducts and fittings
  • Insulation materials
  • Access doors
  • Filter boxes and filter media
  • Roof terminals and roof cowls
  • Fire protection products
  • Fan accessories
  • Backdraught shutters
  • Fan filters
Change language
  • hu
  • en
  • de
Change currency
Sign in
Sign Up
Privacy settings
Our website uses cookies necessary for basic functionality. You can allow additional cookies for broader features (marketing, analytics, personalization). For more details, see our Privacy Policy in the Privacy Notice.
Essential cookies are critical for the website’s core functions, and the site will not work properly without them. These cookies do not store personally identifiable information.
We use marketing cookies to track visitors’ activity on the site. The goal is to show relevant ads to individual users (e.g., via Google Ads and Facebook Ads) and encourage engagement, making our website more valuable.
Statistical cookies help the website owner understand how visitors interact with the site by collecting and reporting data anonymously.
Personalization cookies let us remember information that changes how the website behaves or looks.