Nemes Ventilátorház

Kérdése van? +36-70-369-9944

Categories
Nemes Ventilátorház

Kérdése van? +36-70-369-9944

  • Categories
    • Bathroom and toilet extractor fans
    • Window Fans
    • Cooker hoods
    • Industrial ventilation accessories
    • Industrial ventilation
    • Commercial kitchen extract fans
    • In-line duct fans
    • Centrifugal fans (low pressure)
    • Heat Recovery Systems
    • PVC heat recovery distribution boxes and valve plenums
    • Metal heat recovery distribution boxes and valve plenums
    • Heat recovery system installation materials
    • Metal fittings
    • Metal ducts (rigid and flexible)
    • Duct heaters
    • Silencers
    • Air inlets
    • Air valves
    • Instrument fans
    • Butterfly dampers
    • Rigid round PVC ducts and fittings
    • Rigid rectangular PVC ducts and fittings
    • Flexible PVC ducts
    • Grilles and louvres
    • Fixing and suspension clamps
    • Controllers and electronics
    • Installation accessories
    • Insulated rigid ducts and fittings
    • Insulation materials
    • Access doors
    • Filter boxes and filter media
    • Roof terminals and roof cowls
    • Fire protection products
    • Fan accessories
    • Backdraught shutters
    • Fan filters
  1. Bathroom and toilet extractor fans
  1. Bathroom and toilet extractor fans

Helios M1 MiniVent small room fan

Helios M1 MiniVent small room fan
Helios M1 MiniVent small room fan
Helios M1 MiniVent small room fan
Helios M1 MiniVent small room fan
Helios M1 MiniVent small room fan
Helios M1 MiniVent small room fan
Helios M1 MiniVent small room fan
Helios M1 MiniVent small room fan
145 €

The Helios M1 MiniVent is the quietest axial small room fan range in our product line-up, in three sizes: size 100 moves 90, size 120 moves 170 and size 150 moves 260 cubic metres of air per hour. The smallest size has a noise level of 25 dB(A) at a distance of 3 metres on the low level, and the largest has a highly efficient EC motor.

Every size runs at two speeds, a backdraught shutter is fitted as standard in its connection spigot, and it has an enclosed front facade that conceals the dirty fan opening. It is available as a standard model and in versions with turn-off delay, a humidity control function and a presence detector. Use the size selector to choose the size that fits your duct. Our expert staff will help you with sizing and choosing accessories.

Diameter Diameter:
100
125
150
Not available for purchase!
100 napos pénzvisszafizetési garancia
100 napos visszafizetési garancia
Tudjon meg többet!
Ingyenes légtechnikai tanácsadás
Országos kiszállítás
akár másnapra
Mindössze 2500 forintért
Data
Type of Airflow:
Axial
Availability:
In stock
Mounting Method:
Wall and ceiling
Noise Level:
Very quiet
Manufacturer:
Helios
Bearing Type:
Ball bearing
Speed Levels:
Multi-speed
Louvre:
Backdraught shutter
Pipe Insertable:
No
Protection:
IPX5
Colour:
White
Material:
Plastic housing
Voltage:
230
Number of phases:
1
Air temperature range (°C):
max. +40
Product family:
Helios MiniVent M1
Professzionális bemutatóterem
Professzionális bemutatóteremPróbálja ki termékeinket Budapesten, a Királyhágó utca 30. alatt
Ingyenes szaktanácsadás
Ingyenes szaktanácsadásTapasztalt és segítőkész szakembereink várják hívását
Megbízható kereskedő
Megbízható kereskedő32 év tapasztalatával az ország egyik legnagyobb forgalmazója
Díjnyertes vállalkozás
Díjnyertes vállalkozásDíjainkat és kiemelkedő értékeléseinket tisztességes üzletvitelünk miatt kaptuk
Details

Helios M1 MiniVent: our quietest and most beautiful axial small room fan, in three sizes

The Helios M1 MiniVent is the premium class among the German manufacturer's axial small room fans, and it is also the quietest range in our own product line-up. All three sizes come with two speed levels, a tight-closing backdraught shutter is fitted as standard in the connection spigot, and each has an enclosed, award-winning front facade: the air flows in from all sides, so the facade conceals the dirty fan opening, and the smooth surface can be kept clean with a single wipe.

The smallest size has a noise level of 25 dB(A) at a distance of 3 metres on the low level — thanks to Helios ultraSilence technology. The largest size, 150, has a highly efficient EC motor: on the low level it moves 220 cubic metres of air per hour on 4.5 watts. We recommend this range wherever every item, from the tiles and sanitaryware to the doors and windows, has been carefully chosen, and the ventilation cannot be the exception.

Choose the size

Click the size that fits your duct

Helios M1/100 MiniVentM1/100moves 90 cubic metres per hour
for a Ø100 duct
Helios M1/120 MiniVentM1/120moves 170 cubic metres per hour
for a Ø120 or 125 duct
Helios M1/150 MiniVentM1/150moves 260 cubic metres per hour
for a Ø150 duct, with EC motor

Which size do you need?

First the duct diameter, then the size of the room

The choice is decided primarily by the existing duct diameter: size 100 connects to a Ø100 duct, size 120 to a Ø120 or 125 duct, and size 150 to a Ø150 duct. A reducer or an enlarger creates back pressure and reduces the volume flow.

If the installation is still ahead of you, the size of the room is what counts: size 100 is sufficient for a room of about 6–10, size 120 for 12–20 and size 150 for 20–30 square metres. You can also choose a larger size for a smaller room if you want more intensive extraction — but this comes at the cost of more noise. The manufacturer's flow rates apply to free blowing; if the air has to pass through a duct and an external shutter, the actual value is lower (this is why the table also shows the value measured at 31 pascals resistance). Our expert staff will help you with sizing.

Technical data

Comparison of the three sizes, with the manufacturer's data for the standard models

M1/100M1/120M1/150
Ref. no. (standard model)061710636006041
MotorACACHighly efficient EC
Flow rate free blowingm³/h90 / 75170 / 150260 / 220
Volume flow at 31 Pa resistancem³/h60120180
Maximum pressurePa455333
Power consumptionW9 / 513 / 108 / 4.5
Sound pressure level at 3 mdB(A)30 / 2536 / 3239 / 35
Speed1/min2650 / 22502350 / 20501900 / 1600
Impeller diametermm92111137
Connection spigotmmØ98 (for duct size 100)Ø118 (for duct size 120/125)Ø145 (for duct size 150)
Facade dimensionsmm147 × 147176 × 176210 × 210
Installation depth (without guide wheel)mm96 (52)116 (70)142 (76)
Drilling distancemm116141.5170
Weightkg0.801.051.20
Recommended room sizem²approx. 6–10approx. 12–20approx. 20–30
Voltage / frequency / phaseV / Hz230 / 50 / 1
Backdraught shutterFitted as standard, removable
Protection categoryIPX5, protection class II
Max. air flow temperature°C+40

All 10 variants of the range

Alongside the standard model there are also variants with turn-off delay, humidity control and a presence detector — click the name to go to the product

ProductVersionRef. no.
Helios M1/100 MiniVentStandard model with two speed levels06171
Helios M1/100 N/C MiniVentTurn-off delay and interval mode06172
Helios M1/100 F MiniVentHumidity control function06175
Helios M1/100 P MiniVentPresence detector06174
Helios M1/120 MiniVentStandard model with two speed levels06360
Helios M1/120 N/C MiniVentTurn-off delay and interval mode06361
Helios M1/120 F MiniVentHumidity control function06364
Helios M1/120 P MiniVentPresence detector06363
Helios M1/150 MiniVentStandard model with two speed levels, EC motor06041
Helios M1/150 F MiniVentHumidity control function, EC motor06043

The standard model runs at two speeds, with a two-speed switch. The N/C keeps running for a while after the light is switched off, and automatically ventilates a rarely used room from time to time. The F has a humidity control function, and the P has a presence detector, so it does not even need a light switch. The manufacturer also makes size 150 with turn-off delay (N/C) and as a 0-10 V controllable type; please ask our staff about these.

Dimensional drawings

All dimensions in millimetres — click to enlarge

Helios M1/100 MiniVent

M1/100

Helios M1/120 MiniVent

M1/120

Helios M1/150 MiniVent

M1/150

Performance curves

How much air the fan delivers depending on the back pressure

Helios M1/100 MiniVent

M1/100

Helios M1/120 MiniVent

M1/120

Helios M1/150 MiniVent

M1/150

The curves are based on an air density of 1.20 kg/m³. The longer the duct run and the more bends it contains, the higher the back pressure — this is why this range is designed for a short duct run led out through the wall. The size 150 diagram also shows the levels of the 0-10 V type as dashed lines.

Data sheet

The official Helios catalogue page contains the technical data, performance curves, dimensional drawings and wiring diagram numbers of all three sizes and every variant. It is useful for electricians, architects and anyone looking for precise data for the installation.

Download the manufacturer's data sheet The manufacturer's website
Helios M1 MiniVent exploded view: facade, impeller, guide wheel, backdraught shutter
i

Did you know? If the room has a suspended ceiling and you would run the ventilation duct above the ceiling, this is not the right choice — that calls for a centrifugal fan with a recessed casing, even if the duct run is short. The M1 is designed to ventilate through the wall, via a short duct, directly outdoors.

Accessories from our online shop

The size of the external shutter and the duct follows the fan's spigot: size 100 takes Ø100, size 120 takes Ø125 and size 150 takes Ø150 accessories

The standard models also need a two-speed switch for changing speed — the MVB speed switch is the same for all three sizes. The variants with turn-off delay, humidity control and presence detector do not need a speed switch, as their electronics handle the speed levels.

Frequently Asked Questions

It is decided primarily by the existing duct diameter: size 100 connects to a Ø100 duct, size 120 to a Ø120–125 duct and size 150 to a Ø150 duct. A reducer or an enlarger creates back pressure and reduces the volume flow. For a new installation, the size of the room is what counts: size 100 is sufficient for about 6–10, size 120 for 12–20 and size 150 for up to 20–30 square metres. You can also choose a larger size for a smaller room if you want more intensive extraction — but this comes at the cost of more noise.

The standard model has no letter code: it comes with two speeds and works with a two-speed switch. The N/C offers turn-off delay and interval mode, meaning it keeps running for a while after the light is switched off, and automatically ventilates a rarely used room from time to time. The F has a humidity control function: it starts when the humidity rises. The P has a presence detector, meaning it switches on when someone enters the room — so it does not even need a light switch. The table above shows which version is available in which size.

For the standard models, yes: they can be wired for two speeds, and changing speed requires an operating and speed switch 0-1-2 — the Helios MVB switch is made for this, and we carry it too. The N/C, F and P versions do not need a speed switch, because their electronics handle the speed levels and switching on and off.

The motor with long-life ball bearings is designed for 40 000 operating hours, so every size works in any mounting position — even directly in the ceiling. However, if there is a suspended ceiling and you would run the ventilation duct above the ceiling, this is not the right choice: that calls for a centrifugal fan with a recessed casing, even if the duct run is short.

No. An axial fan cannot cope with the pressure in the shared riser: it either pushes the air back into the room or cannot carry it away. A shared riser needs a centrifugal fan designed for ducted systems. The M1 is designed to ventilate through the wall, via a short duct, directly outdoors.

Yes, every size. The units come with jet water protection IPX5 and protection class II, so they can also be used in wet room zone 1 according to DIN VDE 0100-701 — that is, in the part of the wet room close to the shower. The electrical connection should be made by a qualified electrician.

We also recommend the following product as an accessory

Tartozékok ehhez a termékhez

A Nemes Ventilátorház csapata

Vásároljon Magyarország egyik legmegbízhatóbb légtechnikai áruházából

A Ventilátorház Budapest XVIII. kerületében, a Királyhágó utca 30. alatt található. Sokszoros díjnyertes cég vagyunk, több évtizedes tapasztalattal. A méretezésben és a tartozékok kiválasztásában szakértő munkatársaink segítenek — hívja őket a +36-70-369-9944 telefonszámon.

Ingyenes tanácsadást kérek Felhívom most
Customer account
  • Sign In
  • Sign Up
  • My Profile
  • Cart
  • My Favorites
Information
  • Terms and Conditions
  • Privacy Policy
  • Payment
  • Shipping
  • Contact details
  • Blog
  • facebook

WebShop System
simplepay_hu_v2
viva_com
  • Bathroom and toilet extractor fans
  • Window Fans
  • Cooker hoods
  • Industrial ventilation accessories
  • Industrial ventilation
  • Commercial kitchen extract fans
  • In-line duct fans
  • Centrifugal fans (low pressure)
  • Heat Recovery Systems
  • PVC heat recovery distribution boxes and valve plenums
  • Metal heat recovery distribution boxes and valve plenums
  • Heat recovery system installation materials
  • Metal fittings
  • Metal ducts (rigid and flexible)
  • Duct heaters
  • Silencers
  • Air inlets
  • Air valves
  • Instrument fans
  • Butterfly dampers
  • Rigid round PVC ducts and fittings
  • Rigid rectangular PVC ducts and fittings
  • Flexible PVC ducts
  • Grilles and louvres
  • Fixing and suspension clamps
  • Controllers and electronics
  • Installation accessories
  • Insulated rigid ducts and fittings
  • Insulation materials
  • Access doors
  • Filter boxes and filter media
  • Roof terminals and roof cowls
  • Fire protection products
  • Fan accessories
  • Backdraught shutters
  • Fan filters
Change language
  • hu
  • en
  • de
Change currency
Sign in
Sign Up
Privacy settings
Our website uses cookies necessary for basic functionality. You can allow additional cookies for broader features (marketing, analytics, personalization). For more details, see our Privacy Policy in the Privacy Notice.
Essential cookies are critical for the website’s core functions, and the site will not work properly without them. These cookies do not store personally identifiable information.
We use marketing cookies to track visitors’ activity on the site. The goal is to show relevant ads to individual users (e.g., via Google Ads and Facebook Ads) and encourage engagement, making our website more valuable.
Statistical cookies help the website owner understand how visitors interact with the site by collecting and reporting data anonymously.
Personalization cookies let us remember information that changes how the website behaves or looks.